JBL A3000GTi
2/1 channel. 2 x 1670w RMS @ 4Ω. 1 x 3129w RMS @ 4Ω. 6000w peak. BCA parallel bridge and DBO. 1Ω stable.
Item No: A3000GTi
Delivery: Click Here
Warranty: 1 Year
Availability: In Stock
30 Day Money Back Guarantee
Technical Help for Life
£11,748.83
Call to Order
0845 430 3355
- The revolutionary new A3000GTi is one of the world's most powerful car audio full-range amplifiers, and among the most versatile car amplifiers on the market. It can be used for subwoofers, mid-bass and full-range applications. When combined with the A6000GTi for subs, the result is nothing less than amazing performance.
- The A3000GTi delivers all of the features you would expect from a state-of-the-art amplifier: a slope-selectable, variable electronic crossover; variable phase control; full-range preamp outputs' remotelevel control; Dynamic Bass Optimization (DBO) variable high-pass filter with Variable Q; 50mm2 powerand ground connectors; and current and voltage indicator lights to help you optimize the amp to drive nearly any load.
- Internal lighting – The A3000GTi's interior is fully illuminated to show off its massive components and beautiful layout. The lighting is connected by a dedicated power terminal, allowing it to be controlled externally.
- Indicator control bank – The A3000GTi comes equipped with a sophisticated indicatory bank that can be used as an effective tool when setting up the amplifier, as well as monitoring it during operation.
- Direct Connect – Allows the use of 50mm2 power and ground cable to ensure enough juice is being delivered. No need for special adapters or special fittings.
General
- Power Output:- 1670 Watts RMS x 2 channels at 4 ohms and ≤ 1% THD + N 3129 Watts RMS x 1 channel at 4 ohms, 14.4V supply and ≤ 1% THD + N 3078 Watts RMS x 1 channel at 1 ohm, 14.4V supply and ≤ 1% THD + N
- Signal-to-Noise Ratio 60dBA (reference 1 watt into 4 ohms)
- Dynamic Power 2232 watts
- Effective Damping Factor 6.4 at 4 ohms
- Frequency Response 10Hz – 21kHz (–3dB)
- Maximum input signal 8V
- Maximum sensitivity 250mV
- Output regulation 0,2dB at 4 ohms
- Built-in, variable electronic crossover with selectable slope
- Dynamic Bass Optimization™ (DBO) circuit
- Variable phase control
- Preamp outputs
- Differential inputs
- Internal lighting
- Direct-Connect
- Remote level control included
- Dimensions (H x W x D) 547mm x 585mm x 165mm
