Seat MP3 Changer Adapter 2 (Alpine)

Seat MP3 changer adapter enabling a seamless connection of selected Alpine MP3 changers with the following Seat radios giving you the option to retain your factory installed radio, while avoiding the excess costs of buying an MP3 changer from your car dealer. This MP3 changer adapter together with your Alpine MP3 changer will produce superior sounding results.

Compatible Radios
Seat Aura, Alana, Beta, Elba, Lena, Scala radios: with pre-wired CD lead to the glove box or boot with a (12-pin) rectangular connector. The CD changer connects directly to the CD lead in-line with the adapter.

Check radio fascia for model name.

CD lead location
Check inside or behind glove box or in boot, behind lining on the passenger side. 

MP3 Changer Adapter Connection
The adapter connects by push-fit connection to the pre-wired lead.

Compatible Car Models
Seat Ibiza, Leon, Cordoba, Toledo (1999 on)


Compatible MP3 Changers
Alpine CHA-S634

* Are you aware that MP3 changers and MP3 changer adapters are available as a complete package, fully compatible with the above factory installed radios? Check out our Factory MP3 Changer Packages


Adapter Info
This MP3 changer adapter has been selected from a leading manufacturer and extensively tested guaranteeing optimum compatibility with your factory installed radio and Alpine MP3 Changer. Please Note: we cannot offer technical support on MP3 changer adapters purchased elsewhere as inferior products may have compatibility issues.

Support
If you are unsure or have any concerns about the compatibility of this MP3 changer adapter with your car, factory installed radio and Alpine MP3 changer; please contact us for help as we have an extensive technical information and knowledge resource that is updated on a daily basis.

Alternatively if you experience after sales technical issues you can contact us at any time via Live Support, Phone or Email as all Car Audio Plus products come with FREE Technical Help for life.


Why keep your factory radio?

What is an MP3 Changer Adapter?
MP3 Changer adapters are small electronic control units or converter leads (dependent upon vehicle and radio) and their approximate sizes are (L80mm x H35mm x D55mm) for the box type or (L160mm to L400mm) for the lead type. MP3 changer adapters are a simple way of connecting and controlling an Alpine aftermarket MP3 changer from your Factory installed radio.

Simplified, your factory radio talks a different electronic language to the aftermarket MP3 changer. So the MP3 changer adapter simply translates this so both components can communicate and work in synergy.
 
So if you already have an Alpine MP3 changer, using this adapter is perfect for a low cost upgrade producing outstanding sounding results.
 
Alpine MP3 Changer Adapter Installation
Alpine MP3 Changer adapters install at the rear of your radio or onto the pre-wired MP3 lead (if applicable) for your particular car make and model and the MP3 Changer connects to the other side of the adapter by push-fit connection.

Adapter installation to the car wiring is either by push-fit connection (in the majority of cars) or alternatively by connecting 2 wires from a choice of 3 sources (earth, 12v or 12v switched). To aid installation you also get comprehensive installation instructions.

Alpine MP3 Changer Installation
MP3 Changer installation is generally far easier than you would expect. Alpine MP3 Changers can mount in the boot, glove box or even under a seat and offer multi-angle mounting for installation flexibility. (Compare this MP3 changers dimensions with your available space)

Connection is via the included 5M robust data lead by push-fit connection to one side of the MP3 Changer adapter, and this lead is simply tucked under your interior plastic trim out of site. The other side of the adapter connects to the car wiring as detailed above.

The MP3 changer is mounted using the included brackets and screws, or for easy installation FREE Adhesive Velcro is available if required (request this via email after ordering). Full installation instructions are supplied with each changer. Modern suspension technology allows skip free play-back from your home burned CD-Rs and CD-RWs, MP3s as well as original CDs.

Average installation time by our customers is between 30 to 60 minutes enabling any basic DIYer to install this product comfortably giving you endless hours of music in under an hour.

Professional Installation:
If like a number of our clients, you would prefer a professional installer to carry out the installation for you, I would recommend you look in your local Yellow Pages (Car Electrics & Car Audio) categories or visit Yell.com to find an installer in your area.