Toyota CD Changer Adapter 2 (Kenwood)

Toyota CD changer adapter enabling a seamless connection of selected Kenwood CD changers with the following Toyota radios giving you the option to retain your factory installed radio, while avoiding the excess costs of buying a CD changer from your car dealer. This CD changer adapter together with your Kenwood CD changer will produce superior sounding results.

Compatible Radios
Toyota radios: W53900, W53901, 58816

Check your radio fascia for one of the radio model numbers above or check for a 12 pin (2 rows of 6 pins) CD changer connector or empty CD changer socket at the rear. Alternatively if different, email us your radio model number on the radio fascia to ensure compatibility.

CD Changer Adapter Connection
The adapter connects by push-fit connection at the rear of the radio.

Compatible Car Models
Toyota All models (2003 on) including Avensis, Celica, Corolla, MR2, Rav 4, Yaris


Compatible CD Changers
Kenwood CD changers including: Kenwood KDC-C465, KDC-C467, KDC-C469, KDC-C715, KDC-C717, KDC-C719

* Are you aware that CD changers and CD changer adapters are available as a complete package, fully compatible with the above factory installed radios? Check out our Factory CD Changer Packages


Adapter Info
This CD changer adapter has been selected from a leading manufacturer and extensively tested guaranteeing optimum compatibility with your factory installed radio and Kenwood CD Changer. Please Note: we cannot offer technical support on CD changer adapters purchased elsewhere as inferior products may have compatibility issues.

Support
If you are unsure or have any concerns about the compatibility of this CD changer adapter with your car, factory installed radio and Kenwood CD changer; please contact us for help as we have an extensive technical information and knowledge resource that is updated on a daily basis.

Alternatively if you experience after sales technical issues you can contact us at any time via Live Support, Phone or Email as all Car Audio Plus products come with FREE Technical Help for life.


Why keep your factory radio?

What is a CD Changer Adapter?
CD Changer adapters are small electronic control units or converter leads (dependent upon vehicle and radio) and their approximate sizes are (L80mm x H35mm x D55mm) for the box type or (L160mm to L400mm) for the lead type. CD changer adapters are a simple way of connecting and controlling an aftermarket CD changer (such as Alpine, Kenwood, Sony) from your Factory installed radio.

Simplified, your factory radio talks a different electronic language to the aftermarket CD changer. So the CD changer adapter simply translates this so both components can communicate and work in synergy.

So if you already have a Kenwood CD changer using this adapter is perfect for a low cost upgrade producing outstanding sounding results.

CD Changer Adapter Installation
Kenwood CD Changer adapters install at the rear of your radio or onto the pre-wired CD lead (if applicable) for your particular car make and model and the CD Changer connects to the other side of the adapter by push-fit connection.

Adapter installation to the car wiring is either by push-fit connection (in the majority of cars) or alternatively by connecting 2 wires from a choice of 3 sources (earth, 12v or 12v switched). To aid you with installation comprehensive installation instructions are included.


Kenwood CD Changer Installation
CD Changer installation is generally far easier than you would expect. Kenwood CD Changers can mount in the boot, glove box or even under a seat and offer multi-angle mounting for installation flexibility. (Compare this CD changers dimensions with your available space)

Connection is via the included 5M robust data lead by push-fit connection to one side of the CD Changer adapter, and this lead is simply tucked under your interior plastic trim out of site. The other side of the adapter connects to the car wiring as detailed above.

The CD changer is mounted using the included brackets and screws, or for easy installation FREE Adhesive Velcro is available if required (request this via email after ordering). Full installation instructions are supplied with each changer. Modern suspension technology allows skip free play-back from your home burned CD-Rs and CD-RWs as well as original CDs.

Average installation time by our customers is between 30 to 60 minutes enabling any basic DIYer to install this product comfortably giving you endless hours of music in under an hour.

Professional Installation:
If like a number of our clients, you would prefer a professional installer to carry out the installation for you, I would recommend you look in your local Yellow Pages (Car Electrics & Car Audio) categories or visit Yell.com to find an installer in your area.