1. Open the ashtray and remove the two torx 20 screws in the recess.
2. Using a flat bladed tool with great care, unclip the climate control/heater panel starting in the upper corners.
3. Remove the two torx screws beneath the radio.
4. Lever out the lower left corner of the fascia below the radio by some 20mm.
5. Locate the arm with left hand screw removed at step three by sliding the bracket behind the upper fascia trim.
6. Refit the screws, fascia trim and astray.
Recommended Professional Installation Service:
If like many of our customers, you would prefer an Installation Professional to help, we highly recommend InCar-Installer.com the UK's Leading In-Car Nationwide Installation Service company.
Alternatively look in your local Yellow Pages under the (Car Electrics & Car Audio) categories or visit Yell.com to find an installer in your area. If you would like to have the installation carried out at your home or workplace, look for a mobile installer in the advert or ask when you call them if they offer this service. You'll be surprised, that you find it's cheaper for someone to call to you and install it than to leave it at some fancy garage.