Peugeot 306 Dashmount Bracket

Step 1: Remove the radio using the standard DIN keys, model years 96- will require the use of the factory Peugeot radio keys with the standard factory fitted radio.

Step 2: Remove the two screws either side of radio and lever the fascia forwards; remove the outer framework adjacent to the console edge.

Step 3: Insert the bracket arms between the console and framework and locate with the left upper screw and the lower screw behind the radio trim. Later models will have two hex nuts in the recess to enable the framework/fascia to be removed.

(N.B These screws were dispensed with circa mid 1995 and replaced with studs, merely lay the bracket holes over these and use as an interference fit.).

Step 4: Replace the framework, screws, fascia and radio.