MG ZS (Jul 04 on) Dashmount Bracket

1. Unclip carefully, the two blanking plates in the lower section of the instrument binnacle.

2. Remove the two screws beneath these plates and the two in the upper section of the binnacle.

3. Unclip the entire framework and set aside.

4. Remove the lower left hand screw securing the instrument panel (below the temperature gauge). Insert the bracket behind the tab and refit the screw.

5. Refit the binnacle and blanking plates.

Recommended Professional Installation Service:
If like many of our customers, you would prefer an Installation Professional to help, we highly recommend InCar-Installer.com the UK's Leading In-Car Nationwide Installation Service company.

Alternatively look in your local Yellow Pages under the (Car Electrics & Car Audio) categories or visit Yell.com to find an installer in your area. If you would like to have the installation carried out at your home or workplace, look for a mobile installer in the advert or ask when you call them if they offer this service. You'll be surprised, that you find it's cheaper for someone to call to you and install it than to leave it at some fancy garage.